Glossary entry (derived from question below)
Polish term or phrase:
smukłość sprowadzona
English translation:
relative slenderness ratio
Added to glossary by
Dominic D.
Mar 22, 2017 13:52
7 yrs ago
4 viewers *
Polish term
smukłość sprowadzona
Polish to English
Tech/Engineering
Construction / Civil Engineering
Proposed translations
(English)
4 | relative slenderness ratio | A.G. |
3 +1 | slenderness ratio | Frank Szmulowicz, Ph. D. |
References
http://bit.ly/2nneixX | Cake |
Proposed translations
4 hrs
Selected
relative slenderness ratio
Show publication content!
delibra.bg.polsl.pl/Content/39921/BCPS_43809_2001_Uwzglednienie-przest.pdf
V Gfnean gdzie: ^ reai.m. - smukłość sprowadzona (względna),. E o.mean - wartość średnia modułu sprężystości skorygowana współczynnikiem wg tabeli 2.
--------------------------------------------------
Note added at 4 hrs (2017-03-22 18:30:43 GMT)
--------------------------------------------------
Validation of Buckling in Eurocode3
mararchief.tudelft.nl/file/39308/
Tłumaczenie strony
Transformation from the normal slenderness ratio into the relative slenderness ratio is done with the aid of a material factor λ1. ������. ��. = ��2��. ��2.
delibra.bg.polsl.pl/Content/39921/BCPS_43809_2001_Uwzglednienie-przest.pdf
V Gfnean gdzie: ^ reai.m. - smukłość sprowadzona (względna),. E o.mean - wartość średnia modułu sprężystości skorygowana współczynnikiem wg tabeli 2.
--------------------------------------------------
Note added at 4 hrs (2017-03-22 18:30:43 GMT)
--------------------------------------------------
Validation of Buckling in Eurocode3
mararchief.tudelft.nl/file/39308/
Tłumaczenie strony
Transformation from the normal slenderness ratio into the relative slenderness ratio is done with the aid of a material factor λ1. ������. ��. = ��2��. ��2.
4 KudoZ points awarded for this answer.
Comment: "Danke. "
+1
44 mins
slenderness ratio
IMO
--------------------------------------------------
Note added at 58 mins (2017-03-22 14:51:53 GMT)
--------------------------------------------------
Slenderness ratio is the ratio of the length of a column and the least radius of gyration of its cross section. Often denoted by lambda. It is used extensively for finding out the design load as well as in classifying various columns in short/intermediate/long.
--------------------------------------------------
Note added at 58 mins (2017-03-22 14:51:53 GMT)
--------------------------------------------------
Slenderness ratio is the ratio of the length of a column and the least radius of gyration of its cross section. Often denoted by lambda. It is used extensively for finding out the design load as well as in classifying various columns in short/intermediate/long.
Peer comment(s):
agree |
The Kat (X)
16 mins
|
Thank you, VirtualKat.
|
Reference comments
42 mins
Reference:
Something went wrong...